Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Palmdale Homeowners
Garage door installation in Palmdale typically costs between $700 and $2,200 for a complete door, with most single-car doors landing in the $800-$1,400 range and double-car doors running $1,200-$2,200 depending on material, insulation, and hardware. We’ve installed doors across Palmdale since 2015, and every single job starts the same way: a written price and a written scope before you agree to anything. No handshake deals, no surprise line items on the invoice. Marcus Deller leads our installation team, and he built this company on a rule that’s now Clause 1 of The Haven Standard: the price is on paper before the work starts. Call (661) 449-2581 and you’ll get a live person, not a phone tree.
If you’re reading this because your current door is loud, dented, sagging, or you’re tired of looking at it every time you pull into the driveway, you’re in the right place. We install doors that close quietly, seal against the Antelope Valley wind, and don’t need constant babysitting.
What Our Garage Door Installation Service Includes
Every installation we do in Palmdale follows the same documentation trail. You get a written scope before we start, a photo record when we leave, and a 365-Day Done Right Promise behind the work. Here’s what each type of installation involves.
New Door Installation
A new door installation means replacing your existing garage door with a brand-new unit, including all tracks, rollers, springs, and weatherstripping. We don’t patch old hardware onto a new door and call it done. The old door comes out, the opening gets inspected, and the new system goes in from the wall line out. In Palmdale, we see a lot of doors that were installed in the early 2000s during the first wave of tract home construction, and those doors are reaching the end of their service life around now. When we install a new door, you receive a documented photo record showing the condition of the opening before and after, so you can see exactly what was replaced and why.
Single Car Door
Single car doors are the most common installation we do in older Palmdale neighborhoods like the ones east of the 14 Freeway, where single-car garages are common on homes built before 1990. A single door is typically 8 or 9 feet wide and weighs less than a double, which means it puts less strain on the opener and springs. What surprises most homeowners is that a single door doesn’t cost half of a double. The hardware, tracks, and installation labor are similar; the panel area is what changes. We’ll quote you the exact price for your opening size before any work starts.
Double Car Door
Double car doors, usually 16 feet wide, are the standard on most Palmdale homes built after 2000. A double door carries more weight, which means the torsion spring system matters more, and a cheap spring on a heavy door is a failure waiting to happen. We size the springs to the door’s exact weight, including any insulation, and we document the spring wire diameter and coil count in your photo record. If you’ve ever heard a garage door slam shut because a spring snapped, you know why this matters. In Palmdale’s dry climate, rust is less of an issue than in coastal cities, but heat cycling still takes a toll on spring metallurgy over a decade.
Custom Garage Door
Custom garage door work in Palmdale usually means two things: a non-standard opening size or a specific look the homeowner wants, like a carriage-house design or a window pattern that isn’t in a manufacturer’s default catalog. We’ve ordered custom doors from Clopay and Amarr for homes in Rancho Vista and the gated communities off Rancho Vista Boulevard, where architectural review boards sometimes require specific panel profiles. A custom door adds lead time, typically 3 to 6 weeks, and we factor that into your written scope so you’re never waiting on a door that wasn’t ordered. The price is quoted before the order goes in, not after.
Steel Doors
Steel doors are the default choice for most Palmdale homes because they hold up to the Antelope Valley sun and wind without warping. A 24-gauge or 25-gauge steel door with a polyurethane insulation core is what we recommend for attached garages, because the garage shares a wall with the house and an insulated door cuts heat transfer in the summer. Steel doors from Amarr and Clopay come with factory finishes that resist fading, which matters here more than in the Valley because Palmdale gets more direct UV exposure at elevation. We’ll walk you through the gauge, the R-value, and the finish warranty before you pick a door.
Wood Doors
Wood garage doors are beautiful, and they’re also the highest-maintenance option you can put on a Palmdale home. Solid wood absorbs and releases moisture with the seasons, and while Palmdale’s low humidity reduces that movement compared to coastal areas, the temperature swings between winter mornings in the 30s and summer afternoons over 100 degrees will test any wood door over time. We install wood doors when that’s what the home calls for, and we tell you upfront what the maintenance cycle looks like: refinishing every 2 to 3 years, checking the panel joints annually, and keeping the bottom seal replaced when it dries out. If you want the wood look without the upkeep, we’ll show you steel doors with wood-grain finishes that are hard to tell apart from five feet away.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service doors from Clopay and Amarr, two of the largest door manufacturers in North America. Clopay doors are what we order most often for Palmdale homeowners looking for insulation performance, and we’ve installed enough of them to know the panel profiles and hardware kits by heart. Amarr offers some of the better steel door finishes on the market, and their heritage and carriage-house lines show up frequently in the custom home neighborhoods in west Palmdale.
We also work on Genie and Wayne Dalton equipment, especially when a new door installation includes matching a door to an existing opener setup. If you have a Genie opener on the ceiling and you’re replacing the door underneath it, we’ll verify the opener’s travel limits and force settings before we hand the system back to you. Some competitors will tell you to replace the opener whenever you replace the door. That’s true sometimes and not true other times, and we’ll show you the measured difference before we recommend either way. Whether you have a Clopay, Amarr, Genie, Wayne Dalton, or any other make, we can install the door and document the whole job.
Before
AfterSigns You Need Garage Door Installation Right Now
- The door sags in the middle when it’s open. A door that bows or sags is usually a sign that the internal frame or the panel connectors have failed. Over time, a sagging door puts uneven wear on the rollers and tracks, which creates a cascade of other failures you’ll pay for later. Replacing the door now is cheaper than replacing the door plus tracks plus opener.
- You can see daylight through the door panels. If the panels have rusted through, cracked, or separated at the seams, the door isn’t sealing your garage anymore. In Palmdale’s windy spring months, those gaps let dust and sand into the garage, and in the summer they let cooled air escape. A door that doesn’t seal is doing half its job.
- The door bottom is rotting or the steel has rusted through at the base. This is the most common failure mode we see on older doors in Palmdale, especially on the east side where homes sit on slightly lower ground. The bottom panel collects moisture from the slab, and once rust starts, it doesn’t stop. A replacement bottom section is a patch. At a certain point, the door is done.
- You’ve repaired the door three or more times in the last two years. One broken spring is a repair. Two broken springs in the same year is a pattern. Three service calls in 24 months for a door over 15 years old, and you’re past the point of diminishing returns. Each repair makes the next one more likely because the components are wearing unevenly.
- The door was installed incorrectly and it’s never worked right. We replace doors that other installers put in wrong: tracks out of square, springs sized for a different door weight, panels that bind halfway up. If your door has never closed smoothly or the opener has always sounded like it’s struggling, the installation itself is the problem. A new installation done correctly is the fix, and we can document what was wrong before we take it out.
Our Garage Door Installation Process - Step by Step
- 1
You call, we answer. When you call (661) 449-2581, a live person picks up. We’ll ask about your current door: size, age, what it’s doing, and what you want it to do instead. We’ll schedule a site visit at a time that works for you, and you’ll get a named technician and an on-the-way text before we arrive.
- 2
We measure and document the existing opening. The technician measures the opening width, height, side room, and headroom, and photographs the existing door, tracks, springs, and opener. Clause 4 of The Haven Standard is why we photograph the existing components before quoting a replacement: you see what we saw, and the written scope is based on evidence, not a guess.
- 3
You receive a written price and written scope. Before any work starts, you get a flat, written price that covers the door, hardware, installation labor, and disposal of the old door. The scope spells out exactly what we’ll do, what we’ll replace, and what we won’t touch. If the price can change, we tell you why and when. It usually doesn’t.
- 4
We install the door and test every cycle. Installation takes about half a day for most single doors and a full day for doubles and custom orders. We install the new tracks, springs, rollers, and weatherstripping, then we cycle the door a minimum of ten times by hand to check balance and at least that many times on the opener to verify travel limits and force settings. If the door doesn’t balance perfectly, we adjust it before we call it done.
- 5
You get a documented photo record and your warranty. When the technician leaves, you receive photos of the completed installation, the condition of the opening after the work, and the final door balance test. You also get your written warranty and the 365-Day Done Right Promise in writing. Clause 5 of The Haven Standard: you can prove what was done, because we gave you the record.
How Much Does Garage Door Installation Cost in Palmdale?
A new garage door installation in Palmdale runs $700 to $2,200 for most homes; see our Garage Door Installation cost guide for details. A basic single-car steel door without insulation starts around $700 to $900 including installation. A single-car door with a polyurethane core and a better finish lands in the $1,000 to $1,400 range. Double-car doors start around $1,200 for a basic steel door and go up to $2,200 for an insulated door with windows, a higher-end panel design, or a custom size. Custom wood doors and architectural-grade doors can exceed $2,200, and we quote those individually after measuring.
What moves the price: door width and height, insulation R-value, steel gauge, window inserts, decorative hardware, whether we’re reusing or replacing your opener, and disposal fees for the old door. A 16-foot insulated Clopay door with a high-end finish costs more than a 9-foot uninsulated steel door, and the price difference is mostly in the panels and the spring system we size to match.
The way to avoid overpaying in Palmdale is to get a written price that includes installation. Some companies quote a low door price and then add installation, disposal, and hardware as separate line items that show up after the fact. Our price is one number, written down, before you agree to anything. The free estimate includes all of it: measurement, door recommendation, written scope, and the bottom-line dollar amount. No math after the fact, no “we didn’t expect that” add-ons.
Garage Door Installation Near Palmdale - Our Service Area
We install garage doors throughout Palmdale and the surrounding Antelope Valley, including Quartz Hill, Lancaster, Sun Village, and Lake Los Angeles. We also serve homeowners in Acton, Santa Clarita, La Cañada Flintridge, and Sylmar, and we bring the same written-price system to every address. If you’re in Palmdale proper, we can usually schedule a measurement visit within a few days. For custom door orders, the timeline depends on the manufacturer’s lead time, and we’ll put that in writing when we quote the job. If you’re comparing options, start with our Garage Door Installation in Palmdale page for local pricing context, and check our home page for the full service list.
Serving Palmdale, CA - Our Local Coverage Area
We’re based in the Palmdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Palmdale
Garage door installation is the complete replacement of your existing garage door system: the panels, tracks, rollers, springs, hinges, and weatherstripping. It’s different from repair, where we fix one component. A full installation in Palmdale typically takes half a day to a full day, and it ends with a door that balances correctly and closes against the floor seal. If you need more detail on the parts involved, our Garage Door Installation in Acton page covers the regional specifics we see in the northern Antelope Valley.
Most single-car door installations take 4 to 6 hours on-site, and double-car doors take 6 to 8 hours. Custom doors don’t add installation time, but they add 3 to 6 weeks of lead time for the manufacturer to build and ship the door. We’ll put the timeline in your written scope so you know exactly when the door arrives and when we’ll be on-site.
Plan on $700 to $2,200 for a complete installation, with most single doors between $800 and $1,400 and doubles between $1,200 and $2,200. The variables are door size, material, insulation, and whether you’re adding windows or custom hardware. Call (661) 449-2581 for an exact written quote. The estimate is free, and the price doesn’t change once you’ve agreed to the scope.
Yes. We install Clopay, Amarr, Genie, and Wayne Dalton equipment, and we stock hardware and parts for those brands. We’ll also match a new door to your existing Genie opener when the opener has life left in it. If you’re not sure what brand you have, the photo record we take during the estimate visit will identify it, and we’ll quote from there.
Garage door installation is scheduled, not dispatched same-day, because the door has to be measured and ordered to your opening size. Emergency service is for repair work: a snapped spring, a door off its tracks, or a broken cable. If you need emergency repair before an installation can be scheduled, we answer the phone 24/7 at (661) 449-2581 and we’ll get a technician out. Once the door is safe and functional, we can schedule the full replacement.
You get the manufacturer’s warranty on the door and panels, and our 365-Day Done Right Promise on the installation work. If the installation isn’t right within a year, we make it right. The warranty terms are written in your scope, not verbal, so you have a document to hold us to. That’s the whole point of The Haven Standard.
Clear the area inside the garage about four feet back from the door, and move vehicles out of the driveway. We’ll need access to the garage opener motor and the wall button if we’re matching the door to your existing opener. We handle disposal of the old door and all hardware, and we’ll sweep the area before we leave. If you have shelving or storage directly above the door tracks, that’s worth mentioning when you call.
Palmdale sits in the Antelope Valley, where spring winds regularly gust over 40 mph and sometimes push past 60 in the foothills west of the 14 Freeway. Those winds push against the face of a garage door and test every hinge, roller, and track connection. A properly installed door with a reinforced strut across the top panel handles it. A door installed without bracing will flex and eventually fail, and we see those failures on doors all over the city. If you’re comparing installation quotes, ask whether the door includes wind-load reinforcement. For our team, it’s standard on exposed west-facing garages, and it’s documented in your photo record.
Schedule Your Garage Door Installation Service in Palmdale Today
A new garage door installation in Palmdale starts with a free measurement and a written price. No obligation, no pressure, no “call for a quote” games. Call (661) 449-2581 and we’ll schedule a visit, send a named technician, and put the numbers in writing before anything else happens. If you’d rather browse first, our Garage Door Installation in Quartz Hill page covers the same service for our neighbors just west of Palmdale.
Call (661) 449-2581 for your free estimate. The price is on paper before the work starts, because that’s how it should work.
Written by Marcus Deller, Owner at Servo Garage Doors Palmdale, serving Palmdale since 2015.